+86 0769 86066062 info@kehuimold.com
Plastic Injection Mold

Plastic injection mold is a key tool in injection molding, and its quality and life span directly affect the quality of products and production costs. As an injection mold manufacturer, extending the service life of plastic injection mold can not only reduce production costs but also improve production efficiency and product competitiveness. By optimizing the mold design, choosing the right material, implementing the right processing technology, and strengthening the maintenance and repair, the life of the mold can be greatly extended.

1. Selection Of High Quality Plastic Injection Mold Materials

The choice of mold material is the primary factor affecting the life of plastic injection mold. Different plastic materials have different impacts on the wear and corrosion of the mold, so it is crucial to choose the right mold steel when designing the plastic injection mold.

  • P20 pre-hardened Steel: Suitable for low to medium-production plastic injection mold, with good processing performance and wear resistance.
  • H13 Steel: Commonly used in high-production molds, suitable for molds under high temperature and pressure due to its excellent heat and impact resistance.
  • S136 Stainless Steel: Used in molds that require corrosion resistance, suitable for the production of transparent or corrosive plastic products, can prevent mold rust and corrosion, and prolong service life.
  • Enhanced Surface Treatment: Nitriding, chromium plating, or PVD coating on the surface of the mold steel can enhance wear resistance and corrosion resistance, significantly extending the service life of the mold.

2. Optimization Of Plastic Injection Mold Design

A good mold design can reduce the stress and wear that the mold is subjected to during the production process, thus increasing its service life. The following key factors should be considered in the design:

  • Uniform Wall Thickness Design: Designing uniform wall thickness can reduce the stress concentration in the mold during the cooling process and avoid mold deformation or cracking caused by uneven cooling.
  • Reasonable Demolding Slope: To ensure the smooth demolding of the product, the surface of the mold needs to be designed with an appropriate demolding slope. This not only reduces the friction during demolding but also reduces the damage to the mold.
  • Efficient Cooling System: The cooling efficiency of the mold has a direct impact on the production cycle and mold life. Optimized cooling channel design can ensure uniform cooling of the mold, avoiding thermal fatigue and mold cracking caused by excessive temperature differences.
  • Adequate Ventilation Design: During plastic injection molding, air and gas need to be discharged in time, otherwise it will lead to air bubbles in the product and even increase the stress and wear of the mold. Therefore, a well-designed venting groove can reduce the load borne by the mold during the production process.

3. Precision Mold Processing And Treatment

The influence of high-precision processing on the life of the mold cannot be ignored. The processing must ensure that all parts of the mold meet the design requirements to avoid wear, stress concentration, and processing errors. The following processing treatment can effectively extend the life of the plastic injection mold:

  • Precision Machining: The use of high-precision CNC machining technology (such as CNC, EDM, etc.) to manufacture molds can ensure the dimensional accuracy and surface finish of the mold, thus reducing wear and friction.
  • Heat Treatment Process: Reasonable heat treatment (e.g. quenching, tempering) can enhance the hardness and toughness of the mold steel and avoid deformation or cracks in the mold under high-temperature conditions. After quenching, appropriate tempering treatment can eliminate stress and improve the fatigue resistance of the mold.
  • Surface Polishing And Coating: Polishing the surface of the mold cavity can reduce the friction when the product is released from the mold and reduce mold wear. At the same time, the use of nitriding or chrome plating and other surface treatment processes can enhance the wear resistance and corrosion resistance of the mold.

4. Reasonable Mold Use

Even high-quality molds will accelerate their aging and damage if not used properly. Therefore, reasonable use of the plastic injection mold is the key to extending its life.

  • Control Injection Process Parameters: Injection temperature, pressure, injection speed, and other parameters should be strictly controlled to avoid excessive injection pressure and temperature causing unnecessary load on the mold. Excessive temperature may accelerate the corrosion or oxidation of the mold surface, while excessive injection pressure may lead to mold deformation or damage.
  • Proper Cooling Time: Ensure adequate cooling time for each molding process to avoid thermal fatigue or cracking of the mold due to overheating.
  • Regular Inspection And Calibration: Molds may be deformed or worn out during long production periods. Regular inspection and calibration of the molds can effectively prevent potential damage problems.

5. Regular Maintenance And Care

Routine maintenance and servicing of your plastic injection mold play a vital role in extending its life. A comprehensive maintenance plan and regular inspections of critical areas of the mold can significantly reduce the risk of damage to the plastic injection mold.

  • Cleaning And Lubrication: After each use, the mold surface should be thoroughly cleaned of plastic residues and impurities, especially the mold cavities and cooling channels. In addition, regular lubrication of the mold’s moving parts, such as guide pillars, guide bushings, and slides, can reduce friction and wear.
  • Rust Prevention Treatment: When the mold is not in use, especially in a humid environment, it should be treated with rust prevention. Using an anti-rust agent or applying anti-rust oil on the surface of the mold can effectively prevent the mold from rusting and prolong its life.
  • Replacement Of Worn Parts: Regular inspection and replacement of worn parts, such as slider, guide pillar, etc., can effectively prevent local wear and tear from expanding to the entire mold to avoid greater losses.

Extending the service life of plastic molds involves several links, from material selection, design optimization, and precision processing to routine maintenance, each link is crucial. As an injection mold manufacturer, through reasonable mold design, precision machining process, and regular maintenance, you can effectively improve the durability of the molds, reduce production costs, and increase overall production efficiency.

If you have any questions about how to optimize mold design or extend the service life of your mold, our team is ready to provide you with professional solutions and technical support.

Factory Overview

Latest Post

Mold Materials
Injection Mold Materials Commonly Used in the Automotive Industry
Plastic Injection Mold
5 Points To Extend The Service Life Of Plastic Injection Mold
Injection Mold
How To Optimize Injection Mold To Reduce Production Cycles?
Mold Supplier
How To Choose The Right Mold Supplier In The Automotive Industry?

Call

+86-0769-86066062

Email

info@kehuimold.com

Service Time

9:00 AM – 10:00 PM