+86 0769 86066062 info@kehuimold.com

How to Evaluate the Quality of Mold Machining?

Mold Machining

In the automotive, electronics, and medical precision manufacturing industries, molds are the core tools for producing high-quality parts. The quality of mold machining directly determines product accuracy, production efficiency, and mold lifespan.

Check the Manufacturing Quality of the Mold

Dimensional Accuracy Compliance

Mold dimensional tolerances must meet industry standards. For example, precision molds typically require linear tolerances ≤0.02 mm. Professional tools such as CMM (Coordinate Measuring Machine) should be used for inspection, as out-of-tolerance molds can affect assembly and product functionality.

Material Suitability

The hardness and wear resistance of the mold steel must match its intended use. For example, stamping molds require high-hardness materials (e.g., alloy steel with HRC ≥ 60), while plastic injection molds prioritize corrosion resistance (e.g., P20 steel).

Surface Defect Control

Qualified molds should be free from cracks, porosity, burrs, or other flaws. Detection can be performed via visual inspection, magnetic particle testing, or microscopic analysis. Surface defects may lead to premature mold failure or defective products.

Service Life Verification

Simulate actual working conditions (e.g., 100,000 continuous stamping cycles) to test mold durability. A wear rate below 5% is considered excellent.

Systematic Quality Inspection Methods

Trial Molding Verification

Conduct small-batch trial production before mass manufacturing. For example, plastic molds should verify part dimensional stability (shrinkage ≤ 1.5%) and surface finish (Ra ≤ 1.6 μm).

Process Documentation Review

The machining process must be standardized and traceable, including heat treatment records (e.g., quenching temperature controlled at 850 ± 10℃) and cutting parameter documentation.

Third-Party Certification

Factories certified with ISO 9001 Quality Management System generally have more standardized processes, achieving a final mold qualification rate of ≥98%.

Cost-Benefit Analysis

High-quality molds may have a higher initial cost, but after factoring in lower maintenance and scrap rates, the total cost is often 30%–50% lower compared to inferior molds.

Common Misconceptions and Key Considerations

Avoid Price-Only Decisions

Low-cost molds often use inferior materials or simplified processes, leading to frequent repairs (annual maintenance costs can reach up to 20% of the original price).

Dynamic Evaluation Standards

Different molds have different priorities. For example, food-grade molds must meet hygiene standards (e.g., stainless steel surface roughness Ra ≤ 0.8 μm), rather than solely focusing on hardness.

Importance of After-Sales Feedback

Continuous tracking after mold deployment is essential. For instance, the failure rate of automotive molds should remain below 0.5 times per 1,000 parts; otherwise, the machining process should be reviewed.

Evaluating mold machining quality requires a comprehensive assessment of appearance, dimensional accuracy, surface roughness, assembly tolerance, material and heat treatment, and trial mold performance.

A high-quality mold not only extends service life, reduces maintenance costs, and improves production efficiency but also ensures product consistency and high pass rates.

If you are looking for precision mold manufacturing and inspection solutions, we provide one-stop services for automotive molds, electronic injection molds, and medical precision molds, ensuring top-quality production from the first part to the millionth.

Factory Overview

Latest Post

Mold Materials
Injection Mold Materials Commonly Used in the Automotive Industry
Plastic Injection Mold
5 Points To Extend The Service Life Of Plastic Injection Mold
Injection Mold
How To Optimize Injection Mold To Reduce Production Cycles?
Mold Supplier
How To Choose The Right Mold Supplier In The Automotive Industry?

Call

+86-0769-86066062

Email

info@kehuimold.com

Service Time

9:00 AM – 10:00 PM