+86 0769 86066062 info@kehuimold.com

Comparison of Common Automotive Injection Molding Materials

Common Automotive Injection Molding Materials

In modern automotive manufacturing, plastic injection-molded parts have become essential for both interior and exterior components, as well as structural and functional parts. Different common automotive injection molding materials are widely used in automotive mold manufacturing due to their physical properties, heat resistance, impact resistance, and chemical resistance. This article provides an in-depth comparison of ABS, PP, PC, PA, PBT, POM, and PVC, along with their typical applications, to help you make the best material selection for mold design and production.

ABS (Acrylonitrile Butadiene Styrene)

  • Key Properties: Excellent impact resistance, good dimensional stability, glossy surface, easy to paint and electroplate.
  • Heat Resistance: Moderate, continuous use temperature around 70–90°C.
  • Applications: Instrument panels, central consoles, interior trim, air vent components.
  • Pros & Cons: Good processability, but poor weather resistance and chemical resistance.

PP (Polypropylene)

  • Key Properties: Low density, lightweight, excellent chemical resistance, good fatigue resistance.
  • Heat Resistance: Relatively good, continuous use temperature up to 100°C.
  • Applications: Bumpers, door panels, headlamp housings, engine covers.
  • Pros & Cons: Cost-effective but poor low-temperature impact resistance.

PC (Polycarbonate)

  • Key Properties: High transparency, excellent impact resistance, good heat resistance, often used in PC+ABS alloys.
  • Heat Resistance: Around 120°C.
  • Applications: Headlamp lenses, dashboard transparent parts, automotive windows.
  • Pros & Cons: High strength but easily scratched, relatively expensive.

PA (Polyamide, Nylon)

  • Key Properties: Excellent mechanical strength, wear resistance, and toughness.
  • Heat Resistance: 120–150°C.
  • Applications: Gears, bearing housings, connectors, electrical components.
  • Pros & Cons: High water absorption, which may cause dimensional changes.

PBT (Polybutylene Terephthalate)

  • Key Properties: Good dimensional stability, heat resistance, and chemical resistance.
  • Heat Resistance: 130–150°C.
  • Applications: Automotive connectors, electrical housings, sensor casings.
  • Pros & Cons: Lower impact resistance compared to PA, more suitable for precision electronic parts.

POM (Polyoxymethylene, Acetal)

  • Key Properties: Excellent self-lubrication, wear resistance, high mechanical strength.
  • Heat Resistance: 100–120°C.
  • Applications: Gears, sliding components, car door locks, fuel system parts.
  • Pros & Cons: Poor acid resistance, moderate thermal stability.

PVC (Polyvinyl Chloride)

  • Key Properties: Good flame resistance, chemical resistance, and processability.
  • Heat Resistance: 60–80°C.
  • Applications: Sealing strips, decorative parts, cable sheathing.
  • Pros & Cons: Poor heat resistance, unsuitable for high-temperature components.

How to Choose the Right Common Automotive Injection Molding Materials?

  • Select Based on Part Function: Structural parts require high strength; moving parts need wear resistance and self-lubrication; appearance parts demand high surface quality.
  • Consider Environmental Conditions: Heat resistance, chemical resistance, UV stability.
  • Balance Cost and Performance: High-performance materials usually cost more, so choose based on production budget.
  • Comply with Regulations and Environmental Standards: Ensure compliance with ROHS, REACH, and automotive industry standards.

The success of automotive injection molding depends heavily on proper material selection. ABS, PP, PC, PA, PBT, POM, and PVC each have unique advantages and application areas. From impact resistance to chemical durability, from lightweight to high rigidity, each material offers distinct benefits for specific components. A well-considered material strategy not only improves product quality but also reduces costs and enhances manufacturing efficiency.

If you are looking for a professional automotive injection mold manufacturer, we can recommend the best material solutions based on your requirements and provide precision mold manufacturing services.

Factory Overview

Latest Post

Mold Materials
Injection Mold Materials Commonly Used in the Automotive Industry
Plastic Injection Mold
5 Points To Extend The Service Life Of Plastic Injection Mold
Injection Mold
How To Optimize Injection Mold To Reduce Production Cycles?
Mold Supplier
How To Choose The Right Mold Supplier In The Automotive Industry?

Call

+86-0769-86066062

Email

info@kehuimold.com

Service Time

9:00 AM – 10:00 PM