Automotive Injection Molding
Specialized in providing automotive injection molding service for 14 years
The Parts Structure Of Automotive Injection Mold
Automotive parts injection mold usually consists of six parts, including a melting system, moving template system, fixed template system, molding system, forced exhaust system, cooling system, and electrical system.
Among them, the melting system is used to heat and melt the plastic and other additives, which mainly include the melting cylinder, melting nozzle, etc. The moving template system and fixed template system are responsible for the melting of the plastic and other additives. The moving template system and fixed template system are responsible for the closing and opening of the mold, of which the moving template system mainly includes the template, pressure plate, piston rod, etc., and the fixed template system mainly includes the upper template, the lower template, the template seat, etc. The injection molding system is the part that injects the melted plastic into the mold cavity and cools it for molding, which mainly includes the mold cavity, injection nozzle, intake piping, etc. The forced exhaust system is to ensure that no air bubbles are generated in the mold, and the gas in the mold cavity is forced out during injection molding, mainly including pneumatic motors, exhaust valves, and so on.
A cooling system is set up to reduce the temperature of the injection mold, mainly including water pipes, water ports, and so on. The electrical system is responsible for the control of each part, mainly including the electric control box, pressure gauge, thermometer, and so on.
Auto Parts Injection Mold Production Process
The production process of auto parts injection mold is generally divided into three stages: design, processing, and assembly. The design stage is based on product design requirements and conditions of use, to determine the structure and size of the mold and other parameters, to determine the parts of the processing technology and materials. Processing stage according to the design requirements, material processing, clamp processing, precision machining, etc., to manufacture each mold part. The assembly stage will have been processed parts for assembly, and complete the mold production.
In the automotive industry, plastic parts manufactured through the injection molding process have been growing in recent decades. As the number and variety of plastic resins have increased, so have the opportunities to convert metal automotive parts to plastic. Plastic injection molding solutions can reduce the cost of automotive parts while achieving the goals of lightweighting and proper weight distribution to reduce vehicle weight and thus improve fuel efficiency.
The Rise of Plastic Injection Molded Parts in the Automotive Industry
It’s hard to imagine a car without plastic parts, but there was a time when every vehicle was made almost entirely of metal, which made cars more like tanks. But when plastics began to grow rapidly, it wasn’t long before the automotive industry began experimenting with incorporating plastic parts into vehicle design and production. Today, the automotive industry relies heavily on injection molding to produce a wide variety of plastic parts for engine components, exterior parts, and interior parts.
Injection Molded Plastic Parts In Automobiles
Under the Hood
Cylinder head covers, oil pan, wiring harnesses and connectors, clamps and housings, hoses and tubes, etc.
Interior Components
Instrumentation components, buttons and levers, bezel panels, radio housings and interior components, interior surfaces, dashboard and console covers and brackets, shift knobs, cup holder inserts, door handles, glove compartments, vents and ducts, seatbelt components, trim elements, and more.
Exterior Trim Parts
Light covers, splash guards, bumpers, fenders, grilles, door panels, floor rails, sunroofs, sunroof covers, convertible top assembly parts, door handles, door panels, radiators, radiator supports, headliners and nose plates, mirrors, rear fenders and trunk lids, gas caps and more.
Common Used Plastic materials
ABS
Acrylonitrile butadiene styrene is known for its strength, rigidity, and resistance to a wide range of bases and acids (although some solvents and chlorinated hydrocarbons can damage it). These properties make ABS resin a common choice for automotive dashboards and covers.
PA
Polyamide, often referred to as nylon, is a tough and relatively hard material. Its properties include chemical and abrasion resistance as well as low shrinkage and warpage. Nylon plastic resin has excellent abrasion resistance as well as excellent temperature and impact properties. It is commonly used in the manufacture of screw washers, nuts and rivets for interior and exterior applications, etc.
PMMA
Polymethyl methacrylate (acrylic) is hard and durable. It is clear and can be polished to a glossy finish, which is why it is often used in headlight covers and internal displays for electronics such as radios and navigation systems.
PP
Polypropylene is lightweight, moderately hard/soft, and has high chemical resistance to water, acids, alkalis and many solvents. It is commonly used for high-strength automotive parts such as bumpers, battery covers and cable insulation.
PVC
PVC is a tough, durable, rugged material with good chemical resistance to a wide range of acids and alkalis, making it a good choice for cable insulation, instrument panels and interior panels.
PET
Polyethylene terephthalate is not only suitable for plastic bottles but also belongs to the polyester family, and the correct formulation of this resin can be used for body panels. Some cars are essentially PET cars with all-plastic construction on a metal frame.
Shipping Fasting
Kehui always pays attention to efficiency and mold quality. Due to the focus on the delivery time of customers, we exported the mold on the lead time by customers and sent mold according to the express services designated by customers. We are cooperating with Express companies, such as DHL, UPS, FedEx, and so on, to help customers save costs and receive goods quickly.











